Anchoring

Anchoring Your Tent

Asphalt Pin & Screw Foot System
Designed and manufactured by A & L Products, Inc. for a clean anchor for asphalt. Consists of 48" pin that is driven into the asphalt flush with surface. Pin includes nut that allows the bolt on the bottom of foot to attach for anchoring each leg of tent.

Mud foot, Rope & Rebar
Standard anchoring for dirt, turf, gravel and asphalt. Specially designed mud feet (pictured at top of this page) keep legs from working into muddy surfaces or turf with short spike on bottom of foot. This helps to keep legs stable in windy conditions. Rope, 5/8" rebar stake and OSHA approve caps for safety.

Cement Foot
Designed to anchor each leg into a concrete pad or pier. Leg sits in sleeve and is captured by bolt. Bottom plate has two holes for cement anchor bolts to be installed. Excellent anchoring system for long term or temporary installation. In some applications can be used on decking with proper under structure.

Cement Weights
Cement weights are designed for temporary anchoring of our Trimline 100 frame (1 3/8"). Weights are approximately 65 lbs. A Great solution for street fairs or rental property that does not allow permanent anchoring. Used for 10ft, 15ft & 20ft wide tents only.